A petrol tank that was made from sheet metal, by me, and painted red. I have modified it since this pic. It now has a Pingel fuel tap sticking straight out the back.
A fork brace and a steering damper clamp were also made by me.
Some Technical Details
Frame Yamaha RD400E Rake is 37 Degrees. Frame has been widened to fit a TZR250 swing arm and lowered to give 75mm ground clearance. Engine cradle has been retained as per rules. Sub frame cut off and replaced with a TZR250 sub frame. Wheels….Front=TZR250...2.75x17 Rear =TZR250...4.00x18 Tires Front= 110/90x17 Rear= 25-5.5x18 Goodyear drag slick Swingarm TZR250 Turned upside with bracing removed. Struts replace the shock. Forks TZR250 With Triple clamps handmade from 6061 T6 Ali